Product Search
   OUR PRODUCTS                           
SKU:   AG426316
Vendor SKU:   XRC8004-VK

Nozzle and Cap XRC 8004-VK

Click to enlarge
Price:   Call
Extended range flat spray tips Tip and Cap combination. This is a new product from Spraying Systems. The XR tip is molded with the cap to eliminate handling the seperate components.

XRC TeeJet® 110° tips are excellent for spraying pre-emerge surface-applied herbicides. They perform well over a wide range of pressures (15-60 PSI) and are ideal for rigs with sprayer controllers. At low pressure drifting is reduced while at higher pressure smaller droplets are more desirable for spraying post-emerge contact herbicides.
XR VS tips are color-coded and have stainless steel orifice inserts.

  • Uniform coverage at lower pressure
  • Spraying pressure 15 - 60 psi
  • Nozzle spacing 20 inches
  • Smaller droplets at high pressure for thorough coverage
Spray Tip Material:
    VS tips are stainless steel with VisaFlo® color-coding.
    VP tips are polymer with VisaFlo® color-coding.
    VK tips are ceramic with VisaFlo® color-coding.

Notes: Suggested minimum spray height with 20" nozzle spacing is 17-19" for 80° tips and 15-18" for 110° tips. Adjust spray height in the field to overlap approximately 30% of each edge pattern.
An XR TeeJet® nozzle chart is located at the end of the tips listed below. GPA capacities are based on water. See "Related Parts and Products" for a complete listing of strainers.