Extended range flat spray tips Tip and Cap combination. This is a new product from Spraying Systems. The XR tip is molded with the cap to eliminate handling the seperate components.
XRC TeeJet® 110° tips are excellent for spraying pre-emerge surface-applied herbicides. They perform well over a wide range of pressures (15-60 PSI) and are ideal for rigs with sprayer controllers. At low pressure drifting is reduced while at higher pressure smaller droplets are more desirable for spraying post-emerge contact herbicides.
XR VS tips are color-coded and have stainless steel orifice inserts.
- Uniform coverage at lower pressure
- Spraying pressure 15 - 60 psi
- Nozzle spacing 20 inches
- Smaller droplets at high pressure for thorough coverage
Spray Tip Material:
VS tips are stainless steel with VisaFlo® color-coding.
VP tips are polymer with VisaFlo® color-coding.
VK tips are ceramic with VisaFlo® color-coding.
Notes: Suggested minimum spray height with 20" nozzle spacing is 17-19" for 80° tips and 15-18" for 110° tips. Adjust spray height in the field to overlap approximately 30% of each edge pattern.
An XR TeeJet® nozzle chart is located at the end of the tips listed below. GPA capacities are based on water. See "Related Parts and Products" for a complete listing of strainers.