Drift Guard flat spray tips are designed with a celcon pre-orifice that produces large droplets to reduce drift. The tip holder is color-coded celcon and the actual spray orifice is stainless steel to provide excellent resistance to corrosive solutions. Due to their flat-spray, tapered-edge pattern, these nozzles should be positioned to overlap adjacent nozzle patterns by a minimum of 30%.
Features:- Large droplets to reduce drift
- Removeable pre-orfice
- Nozzle spacing 20"
- Spraying pressure 30-60 PSI
Applications:
- Pre-emerge surface-applied herbicides
- Soil incorporated herbicides
- Post-emerge systemic herbicides
- Systemic fungicides and insecticides
Notes: Suggested minimum spray height for 80° nozzles on 20" spacing is 17-19", for 110° nozzle is 15-18". Spray pattern should overlap a minimum of 30%. A DG TeeJet® nozzle chart is located at the end of the tips listed below. GPA capacites are based on spraying water @ 70 degrees F. VS tips are stainless steel with VisaFlo® color coding. VP tips are polymer with VisaFlo® color coding.
Caps for DG tips are located at the end of the tips listed below. See "Related Parts and Products" for a complete listing of strainers. |
|