|
These chain shields are relative to the New Leader spreaders with the #2 or #3 conveyor chains and the #5 conveyor belts. The part numbers are the metal chain shields and these chain shields do not use the rubber sealer strip. Note that there are part numbers for the RH and LH sides, different lengths and also various metal configurations such carbon steel (CS), 409 stainless steel (409SS) and 304 stainless steel (304SS). Pick the proper part according to the size of your spreader and what the spreader has on it.
The attaching hardware used to fasten the chain shields to the spreader box is as follows: AG719051 Carriage Bolt-SS, AG562065 Hex Nut-SS and AG562050 Lockwasher-SS. Use these quantities of each p/n per spreader box; 28 per 12.5' spreader, 30 per 13' spreader and 32 per 14' spreader.
| NOTE: The chain shields will measure one foot longer than the spreader box size. If in doubt as to what length is needed, measure the length of the chain shield for size verification. For example, on a 12' 6" spreader, the chain shields will measure 13' 6" long, on a 13' spreader, the chain shields will measure 14' long, etc. |
|
|
|
|
|
10 Products
