|
|||||||
Raven has a control system to handle your liquid, granular, or NH3 needs. From one product to five, one boom to 10 - Raven has a system for you!
SCS 330, 440, 450, 660, and 661 controllers are automatic rate controllers that maintain a preset application rate as sprayer speed changes. SCS 700/710/750 chemical injection systems mix chemical (from undiluted chemical tanks) with a carrier (from a main tank) to apply a preset application rate while compensating for sprayer speed changes.
To determine the system components you require follow steps 1-6 below. Raven 330 and 440 system kits are also available that include console, flowmeter, control valve, and may include the speed sensor.
Step 1. Select a Console.
SCS 750
- Product control - 5 , Boom Control - 5 or 10, Printer/GPS Compatiable, Chemical Injection, Carrier/NH3 Control
SCS 710 - Product control - 2 , Boom Control - 6, Printer/GPS Compatiable, Chemical Injection, Carrier/NH3 Control
SCS 660 - Product control - 1 , Boom Control - 6**, Printer/GPS Compatiable (optional), Carrier/NH3 Control, Granular Spread
SCS 661 - Product control - 1 , Boom Control - 10**, Printer/GPS Compatiable, Carrier/NH3 Control, Granular Spread
SCS 450 - Product control - 1 , Boom Control - 6, Printer/GPS Compatiable (optional), Carrier/NH3 Control, Granular Spread
SCS 440 - Product control - 1 , Boom Control - 3, Printer/GPS Compatiable (optional), Carrier/NH3 Control,
SCS 330 - Product control - 1 , Boom Control - 3, Carrier/NH3 Control,
** Boom control requires seperate switch box. Switches not on console.
Step 2. Determine Flow Rate Requirements
-
GPM = GPA x Speed in MPH x Boom Width in inches / 5940
- (ounces may be substituted for gallons)
- RFM 15 - .3 - 15 GPM - Poly - 150 PSI - 1-1/4" (F)NPT
RFM 55 - 1-55 GPM - Poly - 175 PSI - 1-1/4" Hose Barb
RFM 60P - 1-60 GPM - Poly - 175 PSI - 1-1/2"(F)NPT
RFM 60S - 1-60 GPM - SS - 500 PSI - 1-1/2"(F)NPT
RFM 100 - 3-100 GPM - Poly - 150 PSI - 2"(F)NPT
RFM 200 - 15 - 200 GPM - Poly - 90 PSI - 3" (F)NPT
RFM 200C - 15 - 200 GPM - Cast Iron - 300 PSI - 3"(F)NPT
RFM 400 - 25 - 400 GPM - Poly - 90 PSI - 4"(F)NPT
Encoder - Granular (lbs)- 1" Shaft coupler
- 714753 - Valve 3/4" Poly -for Raven 330
009013 - Valve 3/4" Nylon - for Raven 550
007287 - Valve 1" Poly
715184 - Valve 1" Carbon Steel (Fast)
709430 - Valve 1" Carbon Steel
059455 - Valve 1-1/2" Poly
710363 - Valve 2" Stainless Steel
713270 - Valve 3" Stainless Steel
- Radar - we offer both Raven and Dickey-john, Wheel Drive (Magnets), Drive Shaft (magnets), or a Speedometer Transducer
-
A. Console control cable
B. Flow control cable
C. A radar interface cable may be needed if a radar other than Raven is used.
D. Any extension cables
