Put the proven electronic technology to work in your fields-cutting costs and increasing productivity- with the compact, easy-to-operate CCS100 Custom Control System. Once you program the system for your required gallons per acre application rate, the CCS100 gives you fully automatic control as your ground speed changes. The CCS100 system is designed for maximum precision and minimum maintenance.

With a CCS100 you can instantly change application rates on the go. A high-speed valve responds in under 2 seconds, fully opened to fully closed. A handy remote module puts shut-off and flush control right at your fingertips.

To determine which kit is right for your application rate, use the following formula:

Formula:

GPA x MPH x W (ft.) x .00202 = GPM
Example: (20) x (7) x (32) x .00202 = 9.05 GPM
In this example, a flow of 9.05 GPM shows that a 20 GPM system is adequate.

Notes: Maximum pressure for these systems is 100 PSI. Systems include a CCS 100 control console, a control valve, pressure sensor, cables, and some kits include a DICKEY-john radar gun. A system drawing is located at the end of the parts listed below.